Audi A6 2005 - Front Brakes (Steel Version) - RS 6; Servicing Front Brakes (Steel Version) - RS 6

4 Front brakes (steel version) - RS 6
⇒ “4.1 Servicing front brakes (steel version) - RS 6”, page 77
4.1 Servicing front brakes (steel version) -
RS 6
Note
♦ Always install all parts supplied in repair kit.
♦ After renewing brake pads, depress brake pedal firmly several
times with vehicle stationary so that the pads are properly
seated in their normal operating position.
♦ To draw off brake fluid from brake fluid reservoir use a bleeder
bottle which is used only for brake fluid. Brake fluid is poison‐
ous and must NOT be drawn off by sucking through a hose.
♦ Check that the brake caliper moves freely by moving it from
side to side.
1 - Bolt
❑ 196 Nm
2 - Brake caliper
Note
Brake caliper must not be disman‐
tled. Do not loosen any bolts on the
brake caliper.
❑ Detaching and attach‐
ing ⇒ page 78
❑ Renewing ⇒ page 79
3 - Retaining pin
4 - Brake disc
❑ Allocation and wear limit
⇒ page 1
❑ Detaching and attach‐
ing ⇒ page 85
❑ Renewing ⇒ page 86
5 - Bolt
❑ 10 Nm
6 - Brake pads
❑ With pad wear indicator
wire on inner brake pad
❑ Ensure correct installa‐
tion position
Note
The damper weights point towards
the brake disc.
❑ Allocation and wear limit
⇒ page 1
❑ Removing and installing ⇒ page 81
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
4. Front brakes (steel version) - RS 6 77