Audi A6 2005 - Exploded View - Electric Vacuum Pump for Brakes V192; Removing and Installing Electric Vacuum Pump

The following information will appear at the bottom of the display:
Basic setting
Not operated
Pump off
xxx mbar
Syst.n.OK
– Follow “Guided Fault Finding” procedure using vehicle diag‐
nostic, testing and information system - VAS 5051- .
13.1 Exploded view - electric vacuum pump for brakes - V192-
1 - Buffer
2 - Hexagon socket head bolt
(2x)
❑ Tightening torque: 10
Nm
3 - Bracket
4 - Cap nut
❑ Tightening torque: 10
Nm
5 - Stud (on body)
6 - Buffer
7 - Retaining clip
8 - Electric vacuum pump for
brakes - V192-
❑ Removing and installing
⇒ page 185
❑ Removing and installing
(S6) ⇒ page 188
❑ Checking non-return
valve ⇒ page 190
❑ Checking non-return
valve (S6) ⇒ page 190
❑ Checking ⇒ page 183
9 - Retaining clip
10 - Buffer
13.2 Removing and installing electric vacuum
pump
Removing and installing (S6) ⇒ page 188
Removing
Special tools and workshop equipment required
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
13. Checking electric vacuum pump for brakes V192 185