Audi A6 2005 - Bleeding Hydraulic System with Brake Filling and Bleeding Equipment

8.1 Bleeding hydraulic system with brake
filling and bleeding equipment
Note
♦ A pressure of 2 bar is required for bleeding the hydraulic unit.
For this reason it is important to always check the pressure
setting on the bleeder unit.
♦ Observe instructions given in operating manual for -
VAS 5234- or brake filling and bleeding equipment - VAS
6860- .
Special tools and workshop equipment required
♦ Brake filling and bleeding equipment - VAS 5234- or
♦ Brake filling and bleeding equipment - V.A.G 1869-
♦ Or
♦ Brake filling and bleeding equipment - VAS 6860- with adapter
- VAS 5234/1A-
♦ Tool set for brake bleeding - VAS 6564-
♦ Brake pipe bleeding wrench - VAS 5519-
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
8. Bleeding brake system 155