– Fill brake fluid into brake fluid reservoir up to “max” marking.
– Close reservoir.
– Start engine and check brake pedal travel and brake pedal
pressure.
– In the event of excessive pedal travel, check brake system for
leaks and/or repeat bleeding procedure.
Perform road test after completion of bleeding. At least one ABS
control operation must be applied at all four wheels.
Changing brake fluid ⇒ Maintenance ; Booklet 817
WARNING
Risk of accident!
♦ Make sure that the brakes work properly before the vehicle
is driven on the road.
8.2 Bleeding hydraulic system without brake
filling and bleeding equipment
Special tools and workshop equipment required
♦ Reservoir -1-
♦ Tool set for brake bleeding - VAS 6564-
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
8. Bleeding brake system 157
To Next Page
Loading...
