Audi A6 2005 - Removing and Installing Hydraulic Control Unit

⇒ page 40
9 - Buffer (2 x)
10 - Longitudinal member (body)
11 - Nut and washer assembly, 10 Nm
12 - Bracket for ESP
13 - Bolt with bonded rubber bush, tightening torque 10 Nm
❑ Cannot be removed from component
14 - Nut and washer assembly, 8 Nm
15 - Washer
4.2 Removing and installing hydraulic con‐
trol unit
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
♦ Brake pedal actuator - V.A.G 1869/2-
♦ Sealing plugs (repair kit) - 1H0 698 311 A-
Removing
Fitting location:
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
36 Rep. gr.45 - Anti-lock brake system