Audi A6 2005 - Page 139

– Using removal wedge - 3409- , insert inner sealing lip into
groove of cylinder.
Note
When doing this hold piston in front of caliper housing.
– Press piston into the brake caliper housing using piston reset‐
ting tool - T10145- .
Note
The outer sealing lip of the protective cap will then locate in the
groove on the piston.
Note
After servicing and installing brake caliper, bleed brake system
⇒ page 154 .
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
2. Brake caliper FN3 133