♦ Carefully lever protective cap -1- and seal out of brake caliper
with gentle movements using removal tool - T 40338- -2-; take
care not to damage groove for protective cap in brake caliper.
♦ Assembly paste ⇒ Parts catalogue
♦ Assembly tool for protective caps -T10146/5-
♦ Piston resetting appliance -T10145-
Removing
– Force piston out of brake caliper housing using compressed
air.
– Item -1-: Piston resetting appliance -T10145-
Note
Place a piece of wood in the recess to prevent damaging the pis‐
ton.
Removal tool - T 40338-
– Carefully lever protective cap -1- and seal out of brake caliper
with gentle movements using removal tool - T 40338- -2-; take
care not to damage groove for protective cap in brake caliper.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
5. Servicing brake calipers (steel version) - RS 6 143
To Next Page
Loading...
