– Switch on the tester -arrow-.
The tester is ready as soon as a picture of a car appears in the
display.
– Switch on ignition.
– Press the Guided Fault Finding button on the display screen.
– Select the following:
♦ Make
♦ Type
♦ Model year
♦ Version
♦ Engine code
– Confirm the entered information.
Wait until the tester has interrogated all the control units in the
vehicle.
– Press the Go to button and select the option “Function/com‐
ponent selection”.
– Select “Running gear” on the display.
– Select “Brake system” on the display.
– Select the function you require on the display.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
2. Connecting vehicle diagnostic, testing and information system VAS 5051B or VAS 5052 and selecting functions 29
To Next Page
Loading...
