Audi A6 2005 - Page 47

♦ Torque wrench - V.A.G 1331-
♦ Brake pedal actuator - V.A.G 1869/2-
♦ Sealing plugs (repair kit) - 1H0 698 311 A-
Removing
Fitting location:
The hydraulic control unit is fitted on the left-hand side of the en‐
gine compartment.
WARNING
Do not bend the brake lines.
– Note or request radio code on vehicles with coded radio if
necessary.
– Disconnect battery ⇒ Rep. gr. 27
– Detach plenum chamber cover. ⇒ Rep. gr. 50
– To do so, remove rubber seal -1-.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
4. Anti-lock brake system (ABS) Bosch 8.0 41