Audi A6 2005 - Page 54

1 - Bolt
❑ Always renew if re‐
moved ⇒ Rep. gr. 42 ;
Servicing rear drive
shaft
2 - Wheel bearing/wheel bear‐
ing unit
❑ The ABS sensor ring is
installed in the wheel
bearing
3 - ABS speed sensor
❑ Before inserting sensor,
clean inner surface of
bore and coat with lubri‐
cating paste - G 000
650-
❑ Removing and installing
⇒ page 49
4 - Bolt
❑ 18 Nm
5 - Speed sensor wiring on ve‐
hicle
❑ For speed sensor wire
6 - Drive shaft
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
48 Rep. gr.45 - Anti-lock brake system