Audi A6 2005 - Page 69

housing
3 - Ribbed bolt, 196 Nm
❑ Clean ribs if using again
❑ M14 × 1.5 x 38
4 - Bearing bush
❑ Insert into brake caliper housing
5 - Guide pins, 30 Nm
6 - Trim cap
❑ Take off
❑ Insert wear indicator wire in protective cap
7 - Brake disc
❑ Wear limit ⇒ page 1
❑ Detach brake caliper prior to removing
❑ Lubricate contact surfaces between brake disc and wheel hub with polycarbamide grease - G 052 142
A2- . ⇒ Wheels and tyres; Rep. gr. 44
❑ Allocation ⇒ page 1
❑ Thickness ⇒ page 1
WARNING
If one brake disc is dam‐
aged or worn, the other
discs must also be
checked for damage and
wear.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
2. Front brakes FNR G60 (PR 1LG/1LD/1LH/1LV/1ZL) 63