– Remove wheels.
– Secure brake disc with one wheel bolt see -arrow-.
– Lever brake pad retaining spring out of brake caliper housing
with a screwdriver and remove.
Note
Spring is under tension, so protect yourself by holding a glove or
cloth in front of spring.
– Unplug connector for brake pad wear indicator as shown in
illustration.
– Turn connector 90° while using a screwdriver to release con‐
nector from bracket.
– Pull connector upwards out of bracket and detach wire.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
3. Front brakes (PR 1LJ/1LL) 73
To Next Page
Loading...
