Audi A6 2005 User Manual

Note
♦ Maximum lateral run-out of steel brake disc: 0.06 mm
♦ Perform measurement with brake disc installed.
♦ Use dial gauge bracket VAS 6079/1 and dial gauge VAS 6079.
♦ Remove any dirt and rust from brake disc.
♦ Perform measurement 10 mm from outer edge of brake disc.
⇒ “1 Front brakes FN3 (PR 1LT)”, page 56
⇒ “2 Front brakes FNR G60 (PR 1LG/1LD/1LH/1LV/1ZL)”,
page 62
⇒ “2 Front brakes FNR G60 (PR 1LG/1LD/1LH/1LV/1ZL)”,
page 62
⇒ “2 Front brakes FNR G60 (PR 1LG/1LD/1LH/1LV/1ZL)”,
page 62
⇒ “3 Front brakes (PR 1LJ/1LL)”, page 70
1) PR 1LL: special security vehicle
Front brakes (RS 6, steel version)
Factory code (PR
No.)
1LM
Brake caliper Brembo (19")
Brake disc, ventila‐
ted
∅
mm
390
Brake disc, thick‐
ness
mm 36
Brake disc, wear
limit (mm)
mm 34.4
Brake caliper, 6 pis‐
tons (mm)
mm 6 pistons (2x ∅34; 2x ∅36; 2x ∅36
mm)
Brake pad thick‐
ness including
backplate (mm)
mm 16.62
Pad wear limit (in‐
cluding backplate)
mm 9.5
Note
♦ Maximum lateral run-out of steel brake disc: 0.06 mm
♦ Perform measurement with brake disc installed.
♦ Use dial gauge bracket VAS 6079/1 and dial gauge VAS 6079.
♦ Remove any dirt and rust from brake disc.
♦ Perform measurement 10 mm from outer edge of brake disc.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
2 Rep. gr.00 - Technical data

Audi A6 2005 Specifications

General

Brand	Audi
Model	A6 2005
Category	Automobile
Language	English