– Insert brake pedal actuator -V.A.G 1869/2- between brake
pedal and driver's seat (depress brake pedal at least 60mm).
This closes the valves in the brake master cylinder and stops
the brake fluid reservoir from running empty.
– Raise vehicle.
– Remove wheels.
– Connect hose of bleeder bottle to bleeder screw of front brake
caliper.
– Open bleeder screw on front brake caliper to release pressure
from brake system.
– Close bleeder screw.
Note
Do not remove brake pedal actuator -V.A.G 1869/2- .
– Remove brake pads ⇒ page 81 .
Note
♦
Mark brake pads when removing them if they are to be rein‐
stalled. Reinstall in their original position to prevent uneven
braking.
♦
The brake disc is secured with a bolt.
– Disconnect brake line -11-.
– Remove bolts -1-.
– Remove brake caliper from vehicle.
Installing
– Install brake caliper.
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
80 Rep. gr.46 - Brakes - mechanism
To Next Page
Loading...
