Audi A6 2005 - 5.4 Removing and installing front brake pads (ceramic brakes)

1 - Brake caliper
Illustration: Front left brake cal‐
iper
Note
Brake caliper must not be disman‐
tled. Do not loosen any bolts on the
brake caliper.
❑ Detaching and attach‐
ing ⇒ page 90
❑ Renewing ⇒ page 92
2 - Bleeder screws
❑ 2x on each brake caliper
Note
Bleed at each bleeder screw.
3 - Bolts
❑ 196 Nm
❑ Always use new bolts
4 - Bracket
❑ For brake line
5 - Brake line connection to
brake caliper
❑ 19 Nm
6 - Bolts
❑ For bracket for brake
line
❑ 10 Nm
7 - Brake disc
❑ Allocation and wear limit
⇒ page 1
❑ Wear characteristics ⇒ page 10
❑ Detaching and attaching ⇒ page 100
❑ Renewing ⇒ page 101
8 - Bolt
❑ 10 Nm
9 - Seal
10 - Seal
11 - Brake piston
12 - Pad wear indicator wire
❑ On left and right brake caliper
❑ On inner brake pad
13 - Brake pads
❑ With pad wear indicator wire on inner brake pad
❑ Ensure correct installation position
❑ Allocation and wear limit ⇒ page 1
❑ Removing and installing ⇒ page 95
Audi A6 2005 ➤ , Audi A6 Avant 2005 ➤
Brake system - Edition 04.2019
5. Ceramic front brakes 89