Audio Precision ATS-1 User Manual

Slide Rack Mount
e. Remove the eight #6-32 flat head screws securing the front edge
of the top and bottom covers to the chassis (there are two
screws on the right and left sides of each of the top and bottom
covers, near the front four corners of the case). See Figure B-3.
Figure B-3. Slider rack mounting kit, right end
B Rackmounting
Appendix B - Rackmounting Fixed Rack Mount
ATS-1 Dual Domain User's Manual B-3

Audio Precision ATS-1 Specifications

General

Brand	Audio Precision
Model	ATS-1
Category	Test Equipment
Language	English