The ATS-1 Dual Domain can be operated via an IEEE-488 (GPIB)
controller. Instructions are given in the ATS-1 GPIB Programmer’s
Reference Guide, listed below.
Related documentation
ATS-1 GPIB Programmer’s Reference Guide AP Part No. 8211.0045
Audio Measurement Handbook AP Part No. 8200.AMH1
Introducing the ATS-1 Dual Domain
The Audio Precision ATS-1 Dual Domain is a comprehensive
two-channel audio test instrument. It is capable of analog, digital, and
cross-domain (analog-to-digital or digital-to-analog) measurements. It
features the following measurement functions:
In both analog and digital domains:
.
Level (two channels simultaneously)
.
Noise or signal-to-noise ratio (wideband, weighted, or selective)
.
THD+N (total harmonic distortion plus noise)
.
Interchannel phase
.
SMPTE/DIN intermodulation distortion (optional)
.
Real-time two-channel amplitude ratio (interchannel balance or
device gain/loss)
.
Real-time frequency-selective crosstalk
In the analog domain:
.
Wow and Flutter
.
SINAD (ratio of {signal + noise + distortion} to {noise +
distortion})
.
Phase shift through a device
.
Loading (AC resistance of the input of a device connected to the
generator output)
.
AC mains check (voltage, frequency, and distortion of the AC
power line)
1 Description
Related documentation Description
1-2 ATS-1 Dual Domain User's Manual
To Next Page
Loading...
Need help?
General
