adapter must be used. When headphones are connected, the internal
speaker is disabled.
The MONITOR Knob controls the amplitude of the headphones or the
internal monitor speaker.
Normally the speaker or headphones will monitor the input signal, so
the signal heard will be the same as the signal at the input. There is a
cable connection inside the instrument which allows this to be
changed so that the monitor follows the measured signal, after being
processed for the reading. To make this change, see Appendix C.
POWER Switch
This front-panel rocker switch controls the AC mains power. The ON
position is marked “I;” the OFF position is marked “0.”
3 Operation
Front Panel Controls and Connectors Operational Overview
3-6 ATS-1 Dual Domain User's Manual
To Next Page
Loading...
Need help?
General
