AudioCodes Mediant 800 MSBG - 2 Installing the Device; Physical Description; Physical Dimensions; Front Panel

Version 6.2 11 February 2011
Installation Manual 2. Installing the Device
2 Installing the Device
This section describes the device's hardware installation, which includes the following:
 Physical description of the device (refer to 'Physical Description' on page 11)
 Unp
acking the shipped carton and verifying contents (refer to 'Unpacking the Package
Contents' on page 13)
 Mounting the
device (refer to 'Mounting the Device' on page 15)
 Cabli
ng the device (refer to 'Cabling the Device' on page 17)
2.1 Physical Description
This section provides a physical description of the device. This includes physical
dimensions (refer to 'Physical Dimensions' on page 11), and d
escriptions of the front panel
(refer to 'Front Panel' on page 11) a
nd rear panel (refer to 'Rear Panel' on page 13).
2.1.1 Physical Dimensions
The device's physical dimensions and weight are listed in the table below:
Table 2-1: Physical Dimensions
Physical Specification Value
Dimensions (H x W x D)
32 x 34.5 cm (12.6 x 13.6 inches) x 1U
Weight
2.5 kg (5.5 lbs)
2.1.2 Front Panel
The device's front panel is shown in the figure below and described in the subsequent
table.
Figure 2-1: Front Panel
Note: The figure above is used only as an example. The number and type of
input/output interfaces depends on the ordered configuration.