EasyManua.ls Logo

AudioCodes Mediant 800 MSBG - Viewing Channel Status; Figure 4-2: Home Page Displaying Color-Coded Icons; Table 4-2: Color-Coded Trunk;Channel Status Icon

AudioCodes Mediant 800 MSBG
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 6.2 63 February 2011
Installation Manual 4. Monitoring the Device
4.2.2 Viewing Channel Status
The 'Home' page displays channel port icons that indicate the voice channels' operating
status. You can use these port icons to drill down to view detailed channel status. For a
detailed description of the 'Home' page, refer to the device's User's Manual.
Figure 4-2: Home Page Displaying Color-Coded Icons
Table 4-2: Color-Coded Trunk/Channel Status Icon
Trunk/Channel
Status Icon
E1/T1/BRI FXS/FXO
Icon State Color Description Description
Grey Disable: Trunk not configured (not in
use)
Inactive: Channel is currently on-
hook
Green Active - OK: Trunk synchronized Call Connected: Active RTP
stream
Yellow RAI Alarm: Remote Alarm Indication
(RAI), also known as the Yellow Alarm
-
Red LOS / LOF Alarm: Loss due to LOS
(Loss of Signal) or LOF (Loss of Frame)
Not Connected: No analog line is
connected to this port (FXO only)
Blue AIS Alarm: Alarm Indication Signal (AIS),
also known as the Blue Alarm
Handset Offhook: Channel is off-
hook, but there is no active RTP
session
Orange D-Channel Alarm: D-channel alarm -
You can drill-down to view a detailed status of each channel.
¾ To view a detailed status of a channel:
1. In the 'Home' page, click the port of whose status you want to view; a shortcut menu
appears.
2. From the shortcut menu, choose Port Settings.

Table of Contents

Other manuals for AudioCodes Mediant 800 MSBG

Related product manuals