Version 6.2 17 February 2011
Installation Manual 2. Installing the Device
2.3.2.2 Using Mounting Brackets
The procedure below describes how to mount the device in a 19-inch rack. Rack mounting
involves placing the device on a pre-installed rack shelf and then attaching the device's
mounting brackets (to the device and rack frame). The purpose of the mounting brackets is
to secure the device to the rack.
Figure 2-5: Mounting Bracket (Right)
Note: 19-inch rack mounting using mounting brackets is a customer ordered
feature.
¾ To mount the device in a 19-inch rack using mounting brackets:
1. Attach the two mounting brackets (supplied) to each side of the device's chassis, using
the supplied screws, as shown in the figure below:
Figure 2-6: Attaching the Mounting Brackets
2. Place the device on a pre-installed shelf in the rack.
3. Attach the ends of the mounting brackets (that you installed in Step 1) to the vertical
track of the rack's frame, using standard 19-inch rack bolts (not supplied).
To Next Page
Loading...
