Version 6.2 55 February 2011
Installation Manual 3. Configuring the Device
3.6 Backing Up and Restoring Configuration
You can save a copy/backup of the device's current configuration settings as an ini file to a
folder on your PC. The saved ini file includes only parameters that were modified and
parameters with other than default values. If the device has "lost" its configuration, you can
restore the device's configuration by loading the previously saved ini file or by loading a
newly created ini file.
Note:
When loading an ini file using this Web page, parameters not included in the
ini file are reset to default settings.
¾ To save and restore the ini file:
1. Open the 'Configuration File' page (Maintenance tab > Software Update menu >
Configuration File).
Figure 3-32: Configuration File Page
2. To save the Voice ini file to a folder on your PC, perform the following:
a. Click the Save INI File button; the 'File Download' dialog box appears.
b. Click the Save button, navigate to the folder in which you want to save the ini file
on your PC, and then click Save; the device copies the ini file to the selected
folder.
3. To save the Data configuration ini file to a folder on your PC, perform the following:
a. Under the 'Save the Data configuration file to the PC' group, click the Save File
button; the 'File Download' dialog box appears.
b. Click the Save button, navigate to the folder in which you want to save the file on
your PC, and then click Save; the device saves the Data ini file to the selected
folder.
To Next Page
Loading...
