AudioCodes Mediant 800 MSBG - Changing Login User Name and Password; Figure 3-31: WEB User Accounts Page (for Users with Security Administrator Privileges)

Installation Manual 54 Document #: LTRT-10205
Mediant 800 MSBG
3. (Optional) To gracefully lock the device, click the LOCK button, from the 'Graceful
Option' drop-down list select 'Yes', and then define the time (in seconds) after which
the device locks.
4. Click the Reset button.
3.5 Changing Login User Name and Password
To prevent unauthorized access to the Web interface, two Web user accounts (login
accounts) are available (primary and secondary) with assigned user name and password.
¾ To change the login user name and password:
1. Open the 'WEB User Accounts' page (Configuration tab > System menu > Web User
Accounts).
Figure 3-31: WEB User Accounts Page (for Users with 'Security Administrator' Privileges)
2. To change the user name, perform the following:
a. In the 'User Name' field, enter the new user name (maximum of 19 case-sensitive
characters).
b. Click Change User Name; the new user name is applied and the 'Enter Network
Password' screen appears.
c. In the 'Enter Network Password' screen, enter the new user name.
3. To change the password, perform the following:
a. In the 'Current Password' field, enter the current password (maximum of 19 case-
sensitive characters).
b. In the 'New Password' and 'Confirm New Password' fields, enter the new
password.
c. Click Change Password; the new password is applied and the Login screen
appears. Enter the new password.