AudioCodes Mediant 800 MSBG - Figure 3-16: Defining Shaping Class (for Voip Tx Traffic); Figure 3-17: Configured Traffic Shaping for Total WAN and Voip Bandwidth

Installation Manual 46 Document #: LTRT-10205
Mediant 800 MSBG
4. Click the newly added class name; the following page appears:
Figure 3-16: Defining Shaping Class (for VoIP Tx Traffic)
5. Configure the following:
a. From the 'Queue Priority' drop-down list, select '0 (Highest)', i.e., the highest
priority.
b. In the 'Bandwidth - Reserved' field, enter "1000" (i.e., 1 Mbps).
c. From the 'Maximum' drop-down list, select 'Unlimited'.
d. From the 'Policy' drop-down list, select 'Priority'.
e. Click OK.
The figure below shows an example of the configured traffic shaping classes for Tx VoIP
traffic.
Figure 3-17: Configured Traffic Shaping for Total WAN and VoIP Bandwidth