Installation Manual 14 Document #: LTRT-10205
Mediant 800 MSBG
2.2 Unpacking the Package Contents
Follow the procedure below for unpacking the carton in which the device is shipped.
¾ To unpack the device:
1. Open the carton and remove packing materials.
2. Remove the chassis from the carton.
3. Check that there is no equipment damage.
4. Ensure that in addition to the chassis, the package contains the following items:
• Four anti-slide bumpers for desktop installation
• Two mounting brackets for 19-inch rack mounting
• One FXS Lifeline cable adapter (only for models with FXS interfaces)
• T1 WAN splitter cable (only for models with T1 WAN interface)
• One AC power cable
5. Check, retain and process any documents.
Notify AudioCodes or your local supplier of any damage or discrepancies.
To Next Page
Loading...
