Audison bit Tune - Line Analyzer Function

USER’S MANUAL / bit Tune /
85
Check for an audio signal and any noise on the analog audio line at Hi level or Low level (Pre/Hi Level) or on the optical
digital line (S/PDIF). This check is performed by listening to the signal on the internal speaker.
EMS
PC ANALYZER
LINE NOISE
POWER
SEGNAL INPUT
SELECT
RIGHT
VOLUME
MONITOR
47 OHM
SPK SYM
NO LOAD
LEFT
PRE IN BNC SPK INPROBE
MIN • • MAX
LOAD SIMULATOR
SPEAKER IN
TRACK 1
20%
RIGHT
VOLUME
MONITOR
47 OHM
SPK SYM
LEFT
SPK IN
MIN • • MAX
LOAD SIMULATOR
SPEAKER IN
VOLUME
MONITOR
MIN • • MAX
RIGHTLEFT
NO LOAD
RIGHT PRE OUT
LEFT PRE OUT
CHECK THE RIGHT CHANNEL
CHECK INPUTS CONNECTIONS
CHECK RCA CABLES
CHECK SOURCE
CHECK INPUTS CONNECTIONS
CHECK RCA CABLES
CHECK SOURCE
OK
OK
8
8.3.1 ANALOG LINE PRE
8.3 LINE ANALYZER