Audison bit Tune - Rescue Mode Firmware Upgrade

USER’S MANUAL / bit Tune /
93
If, when launching the bit Tune PC software the “bit Tune Warning”
window appears, you can choose between the following two ways to proceed:
A. Use a previous version of the PC software.
E.g.: if you are using PC software v.1.2, open v.1.1;
B. Update the bit Tune firmware. In this case you will have to
proceed as follows:
1. Restart the bit Tune PC software and select RESCUE MODE.
The screenshot on the right shows the Boot Loader version
currently installed on the processor, which allows you to access
the menu for the update.
2. Access the “FILE” menu of the software on your PC and
click “Check for Updates”. This will open the Internet
browser on your PC and it will automatically start to search for
the bit Drive Portal URL: www.audisonbitdrive.eu
3. In order to access the download page that contains the updated versions of documentation, Software and
Firmware, you must enter the LOGIN and PASSWORD created during product registration (see sect. 6.2.3.5).
4. Find the latest file whose name contains the word “Firmware” followed by four digits and click on its symbol
to start the download. When prompted, save the file on your PC.
5. Select “Update Firmware” from the “SETTINGS” menu.
The program will ask you to select the file you just saved
from the Download area or previously saved to your PC.
9.5 “RESCUE MODE” FIRMWARE UPGRADE
WARNING: The files have to be manually downloaded from the bit Drive Portal. The access method to the software
may be different from the one described as follows. Please always refer to the instructions available on
the bit Drive Portal.
9