Audison bit Tune - Rear Panel Connections

USER’S MANUAL / bit Tune /
9
1. EMS COIL PICK-UP: Input for inductive probe (see sect. 8.4).
2. OPTICAL IN: Optical S/PDIF Digital input stereo 192 kHz/24bit MAX.
3. PRE IN L R: Measurement input with RCA connectors. Input sensitivity 70 V RMS max.
(see sect. 6.2.4.1, sect. 6.2.4.8).
These jacks are used for measuring pre-amplified signals.
4. BNC PROBE L R: Measurement input with BNC connectors. Input sensitivity 70 V RMS max
(see sect. 6.2.4.1.
sect. 6.2.4.8) and 700 V RMS activating the attenuator on probe X10. The BNC PROBE L R inputs are internally
protected by a T0.5A micro-fuse
(see section 9.3) To connect to these inputs, use Probes provided inside the
product’s packaging:
5. SPEAKER IN L - R: Measurement input with 4 mm banana sockets.
Input Sensitivity max 700 V RMS
(see sect. 6.2.4.1, sect. 6.2.4.8). Use these jacks for level and power measurements.
The package includes terminated cables with 4 mm banana plugs with different types of termination:
6. SPEAKER LOAD SIMULATOR-SELECTOR: Button for the selection of the simulated load on a OEM source.
Through the SPEAKER LOAD SIMULATOR LEDs
(see sect. 3.3.12-13) you can check the need of the source to have
a load (speaker) in order to operate
(see sect. 8.1).
a. 2 pairs; 4 mm Banana / 2 mm Banana
Red wire
Red wire
Red wire
Red
Red
Red
Red
Red
Red
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Red
Red
Red
Red
Red
Black wire
Black wire
Black wire
White wire
White wire
White wire
Green wire
Green wire
Green wire
Red wire
Red
Red
Black
Black
Black
Black
Red
Red
Black wire
White wire
Green wire
b. 2 pairs, 4 mm Banana / Alligator
Red wire
Red wire
Red wire
Red
Red
Red
Red
Red
Red
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Red
Red
Red
Red
Red
Black wire
Black wire
Black wire
White wire
White wire
White wire
Green wire
Green wire
Green wire
Red wire
Red
Red
Black
Black
Black
Black
Red
Red
Black wire
White wire
Green wire
d. 1 pair; 4 mm Banana / Measuring probe
Red wire
Red wire
Red wire
Red
Red
Red
Red
Red
Red
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Red
Red
Red
Red
Red
Black wire
Black wire
Black wire
White wire
White wire
White wire
Green wire
Green wire
Green wire
Red wire
Red
Red
Black
Black
Black
Black
Red
Red
Black wire
White wire
Green wire
c. 2 pairs; 4 mm Banana / Spade connector
Red wire
Red wire
Red wire
Red
Red
Red
Red
Red
Red
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Black
Red
Red
Red
Red
Red
Black wire
Black wire
Black wire
White wire
White wire
White wire
Green wire
Green wire
Green wire
Red wire
Red
Red
Black
Black
Black
Black
Red
Red
Black wire
White wire
Green wire
WARNING! Do not use these jacks to:
1. Measure the outputs of bridge tied
  ampliers(btl).
2. Measure mains voltage (110 - 240 V) and
devices connected directly to the mains.
100 mm / 39.4 in.
100 mm / 39.4 in.
70 mm / 27 in.
100 mm / 39.4 in.
3.2 REAR PANEL
1 2 4 5 63
3