- 6P10 PILOT MANUAL -
6
2 -PLEASE READ
IMMEDIATELY
This technical installation manual forms part of the appliance which
it refers to. In order for the warranty to be valid, the instructions must
be read prior to using the appliance.
The safety advice and instructions provided in this manual must be
strictly respected.
Our society is not liable for any damages caused from not following
the instructions provided, or improper handling, installation or use.
This technical installation manual can be modi ed without prior
notice.
This manual must be safeguarded and passed on to successive users
for future reference.
It will be considered as evidence in case of litigation.
2.1 - Conservation of documents
DHW ....... Domestic Hot Water
DCW .......Domestic Cold Water
T° ..............Temperature
HP ............Heat pump
2.3 - Abbreviations and acronyms
2.4 - Delivery terms and conditions
In general, the material is transported at the recipient’s own risk.
It is important to ensure that all components have been received and
that no damage has been sustained during transport upon receipt
of the appliance, and before beginning the installation procedures
Indicates warnings and important recommendations.
2.2 - Symbols used
Contains regulated substances, do not throw in the
garbage. If disposing, please respect all regulations
pertaining to the recovery of electric and electronic
equipment.
Maximum working pressure.
PS max
Consult the installation manual before any intervention
on the product, before handling, installation, use , and
maintenance.
Heat power output produced.
Indicates the maximum water temperature in operation.
Admissible storage and transport temperatures are from -20°C to
+60°C.
The 6P10 Pilot must be stored on its original pallet. It must be
transported on its pallet, empty of water, horizontally. It must remain
screwed to the pallet during the transport.
2.5 - Storage and transport
2.6 - Unpacking
On reception of the Pilot, check the state of the packaging as well
as the general state of the product.
Then, take o the plastic protection and unscrew the pilot from its
pallet.
The pilot is screwed with 4 woodscrews at the bottom and at the
top at plates level.
2.8 - End of life of the appliance
Our products are designed and manufactured using
components made of recyclable materials.
The appliance must never, in any case, be disposed
of with household waste, or in a dump.
The dismantling and recycling of the appliances
must be taken charge of by a quali ed professional
and in compliance with all local and national
standards in e ect.
2.7 - Rating plate
Rating plate
To Next Page
Loading...
Need help?
General