3
Actuator controls AUMATIC AC 01.1 / ACExC 01.1
Operation instructions DeviceNet
Page
10. Operation parameters of the actuator 35
11. Description of actuator functions 39
11.1 Operation commands for OPEN / CLOSE operation 39
11.2 Positioner 40
11.3 Stepping mode 40
12. Safety function 40
13. Release function of the local controls (option) 41
14. Additional control inputs (option) 42
15. Combination fieldbus / standard interface (option) 44
16. EMERGENCY STOP function (option) 45
17. Redundant bus connection with component redundancy (option) 47
17.1 Settings for the redundant DeviceNet interface 2 (component redundancy) 47
17.2 External change-over of the communication channels 48
17.2.1 Details of the change-over 48
18. Indication and programming of the AUMATIC 49
18.1 Software parameters of the DeviceNet interface 49
18.1.1 Menu indications 49
19. Description via DeviceNet interface 52
19.1 Assignment of the customer inputs of the DeviceNet interface (option) 53
19.2 DeviceNet connection assignment 53
20. Trouble shooting and corrective actions 54
20.1 Optical signals during operation 54
20.2 Status indications in the display 55
20.3 DeviceNet diagnosis indication in the display 55
20.4 Offline Connection Set of the AUMATIC 56
20.5 Reset of the AUMATIC to the factory settings 56
20.6 Actuator can not be controlled via DeviceNet 57
21. Appendix A EDS file 59
22. Appendix B standard wiring diagram 60
22.1 Legend to standard wiring diagram 61
23. Appendix C Proposed wiring diagrams 62
24. Appendix D Literature references 65
25. Appendix E Connection of the screen for AUMATIC ACExC 01.1 65
Index 67
Addresses of AUMA offices and representatives 68
To Next Page
Loading...
Need help?
General
