Autonics TK Series User Manual

1 Product Introduction
18 © Copyright Reserved Autonics Co., Ltd.
CSTS-E80PP
 Max. load current: 80A (50/60Hz)
※Max. load current for TK4 Series is 50A.
 Current ratio: 1/1000
 Wire wounded resistance: 31Ω ±10%
(unit: mm)
For using CT, do not supply first part current when opening CT output.
It occurs high voltage at CT output part.
Using current of above CTs are same as 50A. But be sure that inner hole sizes are different.
Select it properly for the environment.

Autonics TK Series Specifications

General

Brand	Autonics
Model	TK Series
Category	Temperature Controller
Language	English