Autonics TK Series User Manual

1 Product Introduction
© Copyright Reserved Autonics Co., Ltd. 7
 Keep dust and wire residue from flowing into the unit.
Failure to follow this instruction may result in fire or product damage.
 Check the polarity of the measurement input contact before wiring the temperature sensor.
Failure to follow this instruction may result in fire or explosion.
 For installing the unit with reinforced insulation, use the power supply unit which basic level
is ensured.
The above specifications are subject to change and some models may be discontinued without
notice.

Autonics TK Series Specifications

General

Brand	Autonics
Model	TK Series
Category	Temperature Controller
Language	English