Autonics TK Series - Page 80

6 Parameter Settings and Functions
80 © Copyright Reserved Autonics Co., Ltd.
Mode Name Alarm operation Description (factory default)
SBA
Sensor
break
alarm
-
It will be ON when it detects sensor
disconnection.
HBA
Heater
break
alarm
-
It will be ON when CT detects heater
break.
※H: Alarm output □ hysteresis [A□.HY]
Parameter
Description
AL-1
Selects alarm output 1 operation mode.
AL-2 Selects alarm output 2 operation mode.
AL-3
Selects alarm output 3 operation mode.
Setting
group
Parameter Setting range
Factory
default
Unit
PAR4
AL-1
OFF / DV[[/ ]]DV / ]DVC / [DV] /
PVCC / ]]PV / SBA / LBA / HBA
DVCC
- AL-2 ]]DV
AL-3 OFF