Autronica AutroSafe - Page 21

Mounting Instructions
asafeinstall_dgb, AutroSafe Interactive Fire Detection System, Release 4,
116-P-ASAFE-INSTALL/DGB, Doc-1004796-2, 2021-08-23, Autronica Fire and Security AS
Page 21
◼ Partly fasten the upper
screws.
◼ Hang the cabinet onto
the upper screws.
◼ Partly fasten the bottom
screw.
◼ Tighten all screws.
◼ Feed all the external
cables into the cabinet
from the top or bottom
through the suitable
cable inlets.
For detailed
information on the
connection of
external cables,
see chapter 10.
◼ Reassemble the front
panel and tighten the 4
wing nuts.
◼ Reconnect the cables
between the front panel
and the cabinet.
◼ Insert the text foils (in
the appropriate
language) into their
respective positions.
For detailed
description of the
various text foils,
see chapter 6.8.