Autronica BS-100 DYFI - Password Protected Functions

BS100 DYFI Operators handbook
P-BS100/FE - Rev.F / Doc/ 980114 17 Autronica Fire and Security AS
1,2) Data Change 1) Changing of display
and printer texts.
2) Changing of output
controls, alarm outputs
and disabling outputs.
Add
Print out Detector data
Printer texts
Feed paper
Service Report DYFI-factors Single address
Restart Main prc. (processor)
Loops (processor)
Clear
Disable Loop
Internal buzzer
Internal printer
Restore Loop
Internal buzzer
Internal printer
Test Address-in-alarm
Styringer Styringer
BT-utganger
Adress- Loop From detector
control From front
Data control Transfer comm.port Yes
No
Select “RET” to go 1 step back in the menu structure.
Select “MM” to return to main menu.
1. Password protected on level 1. (Operator level).
2. Password protected on level 2. (Service level).
3. Can be password protected in different market and installations.
6.2 Password protected functions
Some of the functions in the BS-100 menu are password protected on two
levels.
Following functions are password protected:
Password level 1): "OPERATOR LEVEL".
* Disable - Controls
* System - Data
* Disable - Sounders
* Changing of display and printer texts
Password level 2): "SERVICE LEVEL"
* System - Configuration
* Service
* Changing of output controls, alarm outputs and
disabling groups.
Password
Menu cont...