Autronica BS-100 DYFI - Disable Controls (Password Protected on Operator Level); Disable BT-Outputs (DHM, AUX)

BS100 DYFI Operators handbook
P-BS100/FE - Rev.F / Doc/ 980114 23 Autronica Fire and Security AS
7.1.3 Disable controls (password protected on operator level).
Disabling controls, ensures that output controls will not activate in the event
of a alarm:
DISABLE OUTPUT CONTROLS
BT-OUTPUTS CONTROLS RET MM
7.1.3.1 Disable BT-outputs (DHM, AUX)
If the BT-outputs are disabled, the outputs DHM (door holder magnets) and
AUX (control-/alarm output) will not operate at alarm.
If “OUT/IN-CONTROL”, “DISABLE”, “CONTROLS” are selected and
then the “BT-OUTPUTS”, the following text will appear in the display:
DISABLEMENT OF BT-OUTPUTS
DUREATION 02 HOURS RET MM
Select theduration time fordisablement by means of the arrow keys and press
↵
↵↵
↵.
The following text will appear in the display:
DISABLEMENT OF BT-OUTPUTS
DISABLEMENT EXECUTED
Press ↵
↵↵
↵ and the system will return to “DISABLE CONTROLS”-menu with
possibility to return to the main menu.
Disable controls