Autronica BS-100 DYFI - Restore Controls (BSJ-100;101); Restore Sounders (AK); Restore Fire Brigade;Fighters (BMA, BMFO, BMF)

BS100 DYFI Operators handbook
P-BS100/FE - Rev.F / Doc/ 980114 28 Autronica Fire and Security AS
7.2.3.2 Restore controls (BSJ-100/101)
By restoring the controls, the control outputs from external control output
module(s) BSJ-100/BSJ-101 will activate at alarm.
If "OUT/IN-CONTROL", "RESTORE", "CONTROLS" and then
“CONTROLS" are selected, the following text will appear in the display:
RESTORE OUTPUT CONTROLS
RESTORE COMPLETED
Press ↵
↵↵
↵, and the system will return to the "RESTORE CONTROLS"-menu
with possibility to return to the main menu.
7.2.4 Restore sounders (AK)
By restoring the sounder(s), the sounder(s) will revert to their normal
function at fire alarm. This is applicable for the 4 standard sounder outputs
and the outputs from external sounder output board (BSB-100).
If "OUT/IN-CONTROL", "RESTORE", and then "SOUNDERS" are
selected, the following text will appear in the display:
RESTORE: SELECT WITH ⇐
⇐ ⇐
⇐ Þ
ÞÞ
Þ PRESS ↵
↵↵
↵
RESTORE COMPLETED
Press
↵
↵↵
↵, and the system will return to the "RESTORE"-menu with
possibility to return to the main menu.
7.2.5 Restore Fire Brigade/Fighters (BMA, BMFO, BMF)
By restoring the Fire Brigade/Fighters output BMA (Alarm output), BMFO
(Prewarning output) and BMF (Fault output), the output will revert to their
normal function at alarm, prewarning or fault.
If "OUT/IN-CONTROL", "RESTORE" and then "FIRE BRIGADE" are
selected, the following text will appear in the display:
RESTORE: SELECT WITH ⇐
⇐ ⇐
⇐ Þ
ÞÞ
Þ PRESS ↵
↵↵
↵
RESTORE COMPLETED
Press ↵
↵↵
↵, and the system will return to the "RESTORE"-menu with
possibility to return to the main menu.
Restore
sounders
Restore
Fire Brigade