Autronica BS-100 DYFI - Configuration Details

BS100 DYFI Operators handbook
P-BS100/FE - Rev.F / Doc/ 980114 39 Autronica Fire and Security AS
10.2.2 Adjust-clock
If "SYSTEM", "INTERNAL" and then "ADJUST-CLOCK" are selected by
means of the arrow keys, it is possible to adjust the built-in clock. The
following text will appear in the display:
ADJUST DATE AND TIME
DATE: dd.mm.yy TI: hh.mm RET
Adjustment of date and time will be stored in "STORED EVENTS"
described in section 8.
10.2.3 Show clock
If "SYSTEM", "INTERNAL" and then "SHOW-CLOCK" are selected by
means of the arrow keys, it is possible to check that the clock shows the
correct time. The following text will appear in the display:
SHOW DATE AND TIME
DATE: dd.mm.yy TI: hh.mm RET MM
10.3 Configuration
See "Commissioning Handbook" - BS-100.
Configuration