AUX E Series User Manual

AUX air conditioner service manual
dehumidifying condition.
④“Swing”button
If press the “Swing” button, the air grid will runs in the mode cycle of: air grid stops -up and down,
right and left grid runs－grid stops－right and left grid runs－grid stops－up and down grid runs.
Meanwhile, the LCD screen of the operation panel displays the corresponding setting air grid. When
the indoor fan stops, the air grid stops.
⑤“plus”button
a)The “plus”button can increase the setting temperature, and the setting range is 16℃—32℃；
b)The button is invalid when the setting temperature is 32℃；
c) The button is invalid when the mode is ventilation.
d)The setting temperature displays in the indoor temperature zone in twinkling
status(0.5second/0.5second), and display the indoor temperature 5 seconds later after setting.
⑥“minus” button
a)The “minus” button can decrease the setting temperature, and the setting range is 16℃—32℃；；
b)The button is invalid when the setting temperature is 16℃；
c) The button is invalid when the mode is ventilation.；
d)The setting temperature displays in the indoor temperature zone in twinkling status
(0.5second/0.5second), and display the indoor temperature 5 seconds later after setting.
⑦“lock” button
Press the “plus” and “minus” buttons simultaneously and last for 3 seconds or more ， the
corresponding “lock” symbol on the numerical tube screen light on. At this moment, there is no
response from the tube screen to any other buttons being pressed. Under the “lock” condition, if
re-press the “plus” and “minus” buttons simultaneously and last for 3 seconds or more, the “lock”
symbol on the numerical tube screen turns off. When under locking function, the button functions of
the remote controller remain valid.
Under operation condition, the “lock” function can be released when the damaged (or improper
contact) sensor restores and under waiting status.
⑵The button functions of the remote controller
The functions of “on/off”, “mode”, “fan speed” temperature “plus” and “minus” are in accordance
with the functions of the corresponding buttons of the operation panel.
①“timing” button
a) When the air-conditioner turns on, the timing OFF function can be set by pressing the “timing”
button if there is no time setting. The“ ” indication display on the remote controller’s LCD
screen twinkles and shows the setting timing time, the primary time setting is AM12：00.Press
the“▲”button or “▼” button can set the timing close time. Re-press the “timing” button to confirm the
timing time and transmit the signal(shall be set within 10 seconds, otherwise will be resume to the
primary condition), the LCD screen display the symbol of“
”. Then the timing close function starts
running. When reaching the timing close time, the air-conditioner turns off and the timing function is
79

AUX E Series Specifications

General

Brand	AUX
Model	E Series
Category	Air Conditioner
Language	English