Avaya G430 - Page 155

ISDN-BRI Trunk field descriptions
Related topics:
Name on page 155
ISDN-BRI Trunk/Interface on page 155
ISDN-BRI Trunk/Side on page 155
ISDN-BRI Trunk/Country Protocol on page 155
ISDN-BRI Trunk/DCP/Analog Bearer Capability on page 155
Companding Mode on page 155
TEI on page 155
Directory Number on page 156
SPID on page 156
Endpt Init on page 156
Layer 1 Stable on page 156
Name
The name used to identify the circuit pack. Accepts up to 15 alphanumeric characters.
Note:
Avaya BRI stations support only ASCII characters. Non-ASCII characters, such as Eurofont
or Kanafont, are displayed incorrectly on a BRI station.
ISDN-BRI Trunk/Interface
Determines glare handling.
ISDN-BRI Trunk/Side
QSIG glare handling, when Interface is peerSlave.
ISDN-BRI Trunk/Country Protocol
Specifies the Layer 3 signaling protocol used by the country-specific service provider.
ISDN-BRI Trunk/DCP/Analog Bearer Capability
Sets the Information Transfer capability in the Bearer Capability IE of the SETUP message.
Companding Mode
Specifies the companding mode used by the far end switch.
TEI
LAPD address assignment for the TEI field.
Standard Local Survivability (SLS)
Administering Avaya G430 Branch Gateway October 2013 155