This domain name will be used as a suffix to complete non-FQDN names
(hostnames that do not end with a dot).
• Assign an index number that ranks the domain name by priority.
• Specify the domain name.
6. Repeat Step 5 to configure additional domain names.
You can configure up to six domain names.
Gxxx-001(config)# ip domain list 1 avaya.com
Done!
Gxxx-001(config)# ip domain list 2 emea.avaya.com
Done!
7. Optionally, configure the number of DNS query retries, using the ip domain
retry command.
The default value is 2.
Gxxx-001(config)# ip domain retry 4
Done!
8. Optionally, configure the timeout for a DNS query using the ip domain
timeout command.
The default value is 3 seconds.
Gxxx-001(config)# ip domain timeout 4
Done!
9. The DNS resolver is enabled by default.
Gxxx-001(config)# ip domain lookup
Done!
10. If either DHCP Client or PPP are configured in the Branch Gateway, you do not
need to configure DNS resolver because the DNS resolver is enabled by default.
In addition, the DHCP Client and PPP discover DNS servers automatically, so the
list of DNS servers include the automatically-learned DNS servers.
• For DHCP Client, enable DHCP Client by entering ip address dhcp. For
information about DHCP Client see Configuring the DHCP client on
page 205.
Basic device configuration
Administering Avaya G430 Branch Gateway October 2013 77
To Next Page
Loading...
