If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Utilities > Remote Access > Web.
4. Configure the following fields:
• Web Management
• Enable All Addresses
• Address
• Subnet Mask
• User Name
• Password
• Disconnection due to inactivity
• Enable Login Attempts
• Login Denied Time
• Disable TLS 1.0/1.1
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Web field descriptions
Name
Description
Web Management The option to enable remote access to Avaya IX
™
CU360 using the web
interface.
Enable All Addresses The option to allow remote access to Avaya IX
™
CU360 using all IP
addresses or restrict remote access to a specific range of IP addresses.
The options are:
• Yes: Enables remote access from any IP address.
• No: Restricts remote access to a specific range of IP addresses. You
can define the range of IP addresses in Address and Subnet Mask.
Address The IP addresses of the devices that you allow to gain access Avaya IX
™
CU360 remotely through the web interface.
You can enter a value in this field only if you configure Enable All
Addresses to No.
Table continues…
Web field descriptions
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 105
Comments on this document? infodev@avaya.com
To Next Page
Loading...
