Avaya IX Collaboration Unit CU360 - GLAN Parameters Field Descriptions

GLAN Parameters field descriptions
Name Description
MTU The maximum size of data packets sent around the network.
The default MTU size is 1360.
If you transmit data packet of a larger MTU size, the network drops or
fragments the packet. To avoid packet loss or fragmentation, all network
components must use the same MTU size.
For IPv4 address, set the MTU size in the range of 576 through 1500.
For IPv6 address, set the MTU size in the range of 1280 through 1500.
Speed\Duplex Mode The option to select the speed of the network port that defines the data
transmission speed in the network.
The options are:
• Automatic: Avaya IX
™
CU360 selects the speed and duplex mode
automatically. This is the default option.
• Auto - up to 100/Full: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 100/Half: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 10/Full: Semi-automatic mode with a specified maximum
speed and data transmission.
• Auto - up to 10/Half: Semi-automatic mode with a specified maximum
speed and data transmission.
• Manual: Configure the speed and duplex mode manually for the
network.
Speed The speed of the network port.
The options are:
• 10 Mbps
• 100 Mbps
Duplex Mode The data transmission mode that is defined for the network router or
switch.
The options are:
• Half: The half duplex mode provides communication in both directions,
but only in one direction at a time.
• Full: The full duplex mode provides communication in both directions
simultaneously.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 90
Comments on this document? infodev@avaya.com