• Exposure Compensation
6. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
HD1 port field descriptions
Name Description
Control Camera The option to control the digital pan, tilt, and zoom functions of the
camera.
Tracking The option to focus on the active speaker in the room.
White Balance Mode The option to adjust the white balance of the camera to control color tint
in the room.
The options are:
• Automatic: Automatically determine any color tint and adjust colors to
compensate.
• Indoor: Sets the color compensation for artificial light.
• Outdoor: Set the color compensation for natural sunlight.
• Fluorescent Light: Reflects more green color wash than the
conventional colors.
Exposure Compensation for
end points
The option to enable the camera to compensate the exposure level
manually, when the camera image is too bright or dark.
Exposure Level for web
interface
The option to enable the camera to compensate the exposure level
manually, when the camera image is too bright or dark.
Configuring the Avaya IX
™
CU360 USB port
About this task
Configure the settings of each camera that you connect to the USB port of Avaya IX
™
CU360.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 80
Comments on this document? infodev@avaya.com
To Next Page
Loading...
