The default PIN is 1234.
If your administrator configured a PIN to gain access to the advanced settings, Avaya IX
™
CU360 prompts you to the enter PIN. After you enter the PIN, Avaya IX
™
CU360 displays
the Advanced window.
3. Select Presentation.
Avaya IX
™
CU360 displays the Presentation window.
4. Configure Local Presentation Mode to Automatic.
Result
Avaya IX
™
CU360 automatically displays shared content on the screen to local participants when
the endpoint is not participating in meetings. The endpoint also displays alerts for incoming calls.
Disabling the Avaya IX
™
CU360 video
About this task
Configure meetings to start with video disabled.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure Video Privacy to Yes.
3. On the web interface, click Save.
Configuring meeting recording in Avaya IX
™
CU360
About this task
Avaya IX
™
CU360 saves meeting recordings in the MP4 format. The video stream is recorded in
the H.264 format, while the audio stream is recorded in the AAC-LC format.
You can save meeting recordings on a USB device or on the enterprise network. When you save
recordings on a USB device, you can transfer the recordings to an external server, such as a
generic FTP server or Avaya Equinox
®
Streaming and Recording Server. To save recordings on
the enterprise network:
• The Avaya Equinox
®
Conferencing deployment must have a recording server.
• The Avaya IX
™
CU360 endpoint must be managed by Avaya Equinox
®
Management, and
Avaya Equinox
®
Management must have remote access to the endpoint.
Initial administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 40
Comments on this document? infodev@avaya.com
To Next Page
Loading...
