Name Description
User Name The user name for the SSH management.
The default user name is Admin.
Password The password for the SSH management.
The default password is 1234.
RS232 Serial Port section
Name Description
Always Initialized The option to accept an AT initialization command before accepting other
commands, when required by the API.
Use this option when the controlling device cannot detect whether Avaya
IX
™
CU360 restarted.
Baud Rate The baud rate of the devices that you allow to remotely gain access to
Avaya IX
™
CU360.
The baud rate must be the same as the baud rate of the controlling
device.
Configuring telnet in Avaya IX
™
CU360
About this task
With telnet, you can control Avaya IX
™
CU360 by using CLI commands.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Utilities > Remote Access > Telnet.
4. Configure the following fields:
• Telnet Management
• Enable All Addresses
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 112
Comments on this document? infodev@avaya.com
To Next Page
Loading...
