Avaya IX Collaboration Unit CU360 - Verifying Before Disconnecting Calls; Configuring LAN Connectivity

Configuring Avaya IX
™
CU360 to verify before
disconnecting calls
About this task
Configure Avaya IX
™
CU360 to ask for confirmation before disconnecting calls to prevent
accidently disconnecting calls.
Procedure
1. Do one of the following:
• From the endpoint, click Configure > Calling.
• From the web interface, click Basic Settings > Call-Answer mode > General.
2. Configure Confirm Disconnect to Yes.
3. On the web interface, click Save.
Configuring LAN connectivity for Avaya IX
™
CU360
About this task
Manually configure LAN or modify the LAN connection configured during the initial setup.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. Click Networks > GLAN.
3. Configure the following fields:
Endpoint menu Web interface
IP Address Mode Automatic IP Address
IP Address IP Address
Subnet Mask Subnet Mask
Gateway Gateway IP Address
DNS DNS Server IP Address
4. On the web interface, click Save.
Initial administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 46
Comments on this document? infodev@avaya.com