Avaya IX Collaboration Unit CU360 - Quick Setup Field Descriptions

Quick Setup field descriptions
Name Description
System Name The name of the Avaya IX
™
CU360 endpoint.
Avaya IX
™
CU360 also uses the system name as
the user name to register for SIP and H.323.
Country The country where Avaya IX
™
CU360 is located.
The value of Language and the language of the
menu automatically changes based on the
language of the country you select.
Language The language of the menu.
You can select different languages for the web
interface and the endpoint interface.
Protocol Type The protocol that Avaya IX
™
CU360 must use.
• H.323: Select this option to register Avaya IX
™
CU360 to only a gatekeeper.
• SIP: Select this option to register Avaya IX
™
CU360 to only a SIP server. For redundant SIP-
based deployments, you can register the endpoint
to maximum three SIP servers.
• H.323 and SIP: Select this option to register
Avaya IX
™
CU360 to a gatekeeper and a SIP
server.
The selection of the protocol, such as SIP or H.323,
depends on the protocol that the enterprise network
uses.
IP Address Mode The option to determine whether the IP address is
allocated dynamically using DHCP or designated a
static IP address.
Use static IP addresses for Avaya IX
™
CU360
deployed on:
• Public networks.
• SIP networks where the endpoint is secured using
TLS certificates and the certificate requests need
static IP addresses.
IP Address The static IP address.
If you do not enter a static IP address, this field
displays the allocated dynamic IP address.
Table continues…
Initial setup and connectivity
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 32
Comments on this document? infodev@avaya.com