Avaya IX Collaboration Unit CU360 - Connecting Avaya AV Grabber to Avaya IX CU360

Connecting Avaya AV Grabber to Avaya IX
™
CU360
About this task
Avaya AV Grabber is an optional cable kit for Avaya IX
™
CU360. Using Avaya AV Grabber, you
can connect a computer to Avaya IX
™
CU360 with a cable and use the computer to share content
in meetings.
The Avaya AV Grabber kit contains:
• An Ethernet cable.
• A USB cable.
• An HDMI swivel connector cable.
When you connect Avaya AV Grabber to Avaya IX
™
CU360, the video conferencing application
detects the video input from Avaya IX
™
CU360 as an additional USB video input. You can use the
USB option to share content from Avaya AV Grabber.
Avaya AV Grabber supports sharing video and content in Avaya IX
™
CU360 meetings.
Procedure
1. Using an HDMI cable, connect a computer to the HDMI input connector of Avaya AV
Grabber.
The HDMI cable is not included in the optional Avaya AV Grabber kit.
2. Using the USB cable, connect Avaya AV Grabber to the USB port of Avaya IX
™
CU360.
Initial setup and connectivity
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 34
Comments on this document? infodev@avaya.com