Avaya IX Collaboration Unit CU360 - Configuring Calling Number

Configuring calling number in Avaya IX
™
CU360
About this task
Configure a number to call automatically by pressing
. You can also specify the call
protocol.
This configuration is available only if your administrator enables the advanced settings for users.
Procedure
1. Do one of the following:
• On the endpoint main menu, click Configure.
• On the web interface, click Administrator Settings.
2. On the endpoint, click Advanced.
The default PIN for Advanced settings on the endpoint is 1234.
If your administrator configured a PIN to gain access to the advanced settings on the
endpoint, Avaya IX
™
CU360 prompts you to enter the PIN. After you enter the PIN, Avaya
IX
™
CU360 displays the Advanced window.
3. Click Calls > Predefined Party.
4. Configure the following fields:
• Enabled
• Number
• Call Protocol
5. On the web interface, click Save.
Related links
Enabling the Avaya IX CU360 advanced settings on page 37
Predefined Party field descriptions
Name
Description
Enabled The option to enable or disable the predefined party feature in Avaya IX
™
CU360.
Number The number that Avaya IX
™
CU360 calls.
Table continues…
Advance administration
April 2020 Installing and Administering Avaya IX Collaboration Unit CU360 76
Comments on this document? infodev@avaya.com